
Large file collection Ý Tưởng Khác
Dreidel Có Đế Xoay Dễ Dàng Cho Trẻ Em
- Downloads
- 271
- Likes
- 46
- Views
- 1,265
- Remixes
- 0
- Comments
- 0
Files 22 101.1 MB
- Dreidel_r2_DP_1765463453.stlSTL · 1.8 MB
- Dreidel_Handle_r3_1765463454.stlSTL · 197.7 KB
- Easy-Spin_Stand_50_1765463454.stlSTL · 2.1 MB
- Easy-Spin_Stand_80_1765463456.stlSTL · 5 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #159339
- Category
- Ý Tưởng Khác
- Published
Description
This is a dreidel (sevivon) for your next Hanukkah party!
Features and variations
The base dreidel comes in several variations, based on 3 features (8 models in total):
- Diaspora version (D): The D versions have a shin (ש) instead of a pe (פ). In some traditions, the pe is used in Israel whereas the shin is used outside of Israel.
- Screw mount (S): The screw mount is for use with the easy-spin stand. This is a great way for small children to spin the dreidel without it flying across the room. It will also spin fairly well without the stand.
- Pointy bottom (P): The bottom can be pointy or smooth. I recommend the smooth one for smaller children, although it doesn't spin as well.
You can look for these letters in the filename to pick the right one.
Printing instructions
- Print the dreidel as oriented in the .stl file (upside down). You shouldn't need any supports.
- Print the handle as oriented in the .stl file (upside down). You may need a brim, which is included in the .gcode file.
- Use a drop of super glue on the threads as you attach the handle to the dreidel. It's probably not going anywhere.
Easy-Spin stand
- You can print the optional Easy-Spin stand and use it with the screw mount dreidels. Choose either the 50 mm or 80 mm diameter.
- To install: thread the dreidel onto the stand, and after a few turns it will drop into place.
- To remove: lift the dreidel up until it reaches the threading, then unscrew it.
Safety notes
- The dreidel has rounded edges to make it a bit safer, though supervision of children is always required.
- The pointy versions are… well… pointy. Not recommended for small children.
- The handle by itself is a choking hazard for small children. Make sure to glue it well so it can't be removed.
Links
- If you'd like a party headband to go with your dreidel, so you always know where it is, you can get one here: https://www.printables.com/model/309312-dreidel-headband-hairband
Print spec
- Formats
- gcodestl
- Model files
- 22
- Total size
- 101.1 MB
- Largest file
- 9 MB

