Adapter Cảm Biến EVA3.0 LGX ERCF

This is a remix of the EVA3.0 adapter for the LGX to be compatible with the ERCF extruder sensor (AH3364-QPB).

BOM:

• PTFE part is 6.8mm (add this to the length of the hotend PTFE length)
• M3 steel washer
• 6x3mm magnet (1 or 2, I use 2 stacked)
• M3 insert (3.9 smallest diameter)
• M3x18 screw (to hold the sensor in place)
• The HAL sensor (AH3364-QPB)
• A bunch of wires

Make sure that this small wall is printed (usually requires to enable “Thin walls” support).