Giá Đựng Filament - Dạng Đứng

This is a free-standing filament rack that will hold 1kg (~200mm) spools. The holes are 20mm with set screw holes that can secure the dowels with M3XWhatever screws. Mine were a little loose because I had ¾ X 33-inch dowels, so the screws are m3x5, and everything is nice and snug. This will fit on a Bambu Lab build surface, as shown in the pictures.

As shown, Overture Matte Red PLA with 3 perimeters at 0.2mm layer height. 15% gyroid infill. 

I'm thinking of making a bracket to stack these even higher. If you're interested in that, let me know. Otherwise, I'm off to the next thing.