Skip to main content
F3D
Hộp STOLI 1

6 images

Đồ Chơi

Hộp STOLI

By JamesThePrinter

Downloads
242
Likes
68
Views
1,758
Remixes
1

Files 3 515 KB

  • Base_1765474133.stlSTL · 278.2 KB
  • Lid_-_Single_Color_1765474134.stlSTL · 147.6 KB
  • Lid_-_Multi-Color_1765474135.3mf3MF · 89.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This latching container will hold 10 of each STOLI piece. STOLI is a game modeled by BV3D and can be found here.

The base can be printed with or without color added (MMU/AMS required). For the lid, I have included 2 versions - Single color and Multi-color.

Print Settings

No special settings are required. However, I used a multi-material printer to add color to the inside of the container. This helps you remember where to place each piece so that everything fits properly. There are 40 squares inside that can easily be painted to match whatever colors you used for your STOLI pieces.

If you are using the multi-color lid, the 3mf file includes separate objects for each letter. This allows for quick and simple color painting.

Assembly

Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If the hole is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.

If you did not add color to the inside of the base, use the pictures above as a reference when adding pieces to the container.

Buy Me A Coffee

The following filaments were used in the pictures above:

  • Bambu Lab Matte Charcoal PLA
  • Bambu Lab Matte Lilac Purple PLA
  • Bambu Lab Matte Lemon Yellow PLA
  • Bambu Lab Matte Mandarin Orange PLA
  • Bambu Lab Matte Scarlet Red PLA
  • Bambu Lab Matte Marine Blue PLA

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
515 KB
Largest file
278.2 KB

0 comments

See all