Skip to main content
F3D
Dụng cụ bơm mỡ ray trượt tuyến tính 1

1 image

Ý Tưởng Khác

Dụng cụ bơm mỡ ray trượt tuyến tính

Remix of Hộp đựng bánh xe ray trượt tuyến tính By Grafton1046

By RicF_879167

Downloads
111
Likes
27
Views
1,351
Remixes
1

Files 3 321.1 KB

  • 12H_1765525246.stlSTL · 76.9 KB
  • 9C_1765525253.stlSTL · 78.2 KB
  • 7H_1765525257.stlSTL · 166 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

These tools are for cleaning of and packing grease into a linear rail that doesn't have a grease port. They were specifically done for Voron v0 and Trident printer builds, but likely will fit other 7H, 9C, and 12H rails.

I printed them on a resin printer for use, but did try FDM as well with some success. 

For use, attach a syringe via a length of silicone tubing.  I used aquarium airline tubing and a 20ml syringe. Use care if cleaning the bearings with alcohol and wear proper safety protection, as fluid will spray out from the bearing under any pressure you apply. You can slide the bearing back and forth on the rail in order to clean along its length, as well as when injecting grease.  Note that you should allow the bearing to dry after cleaning and before injecting grease, as you don't really want to mix your cleaning fluid into the grease.

When transferring the bearing from its rail, use care to not dislodge any of the balls. Go slow and don't rush.

The hole and nut on the end are for an m3 bolt and nut.

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
321.1 KB
Largest file
166 KB

0 comments

See all