Tấm đế Gridfinity ghép bằng vít

this system is fully compatible with standard grifinity models. 

Based on ZackFreedman design 

it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly overkill!  the holes are for press fits with 6x2 magnets.

4-40 heat set inserts 

6x2mm magnets

4-40 socket head cap screws

1/8 in dowel pin

If you find any problems with the model let me know, the SOLIDWORKS model can be a bit glitchy still working on fixing it, I recommend changing the length of the model before the width since it seems to be more reliable. also rebuilding the model(ctrl-Q) fixes the problem most of the time.