Ốp lưng và tường GoPro 2 và 3

There are many accessories ready for gopro (which are used by nearly all compatibles), but most of them have 3 drawbacks:

• cannot be used in other project or cannot be easily modified

• most of them are concepts, no real print is pictured

• most of them do not consider tollerances of the printers and at the end you need to remove with a file some plastics for fitting them well. I have created something basics in Fusion 360 (I give you also the files), maybe are not the best go pro accessories you can find, but are basics blocks you can use in your project and WORK just right out of the printer.

  of course you are free to use and remake, if you modify with fusion360, PLEASE give also the F3D file.

  Print Settings

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

10%

Notes:

REMEMBER:
if you use PLA you MUST set extrusion multiplier 0.9 or as it is called in CURA, flow 90%.

in this way they will be perfect also with the oldest and worst 3d printer out there.

Category: Camera