
Vỏ Hộp Hiển Thị Prusa Mini Có USB
Remix of Nắp lưng LCD Prusa Mini bảo vệ bo mạch PCB khỏi bụi bẩn By Somnium
- Downloads
- 1,180
- Likes
- 218
- Views
- 6,359
- Remixes
- 2
- Comments
- 0
Files 7 3.3 MB
- displaycover_1764602146.stlSTL · 391.5 KB
- mini-displayassembly_1764602149.stepSTEP · 383.1 KB
- displaycover_1764602152.3mf3MF · 101.8 KB
- displaycoverusb_1764602154.stlSTL · 385.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Nắp Lưng Phẳng Cho Vỏ Hộp Màn Hình USB MINI(+)Byfuchsr · 04/14/2026
Ốp lưng màn hình Prusa Mini(+) - dùng được ốc zinByMrHolmesCZ_148118 · 03/29/2025
Details
- Model ID
- #157280
- Category
- Ý Tưởng Khác
- Published
- License
- Creative Commons — Attribution
Description
Remixed Somnium's back cover to be a flat plate to simplify printing and overhangs. Also uses the screw holes for the circuit board to secure the back cover to prevent any rattling issues. Need to use 4 - M3x12mm screws to secure the back cover through the circuit board to the front. The screws securing the circuit board were very tight so keep that in mind.
Added a USB version to hold this cable: https://www.amazon.com/gp/product/B07ZSZQNWP/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Slide the USB port into the holder until it snaps in, make sure the inner tabs line up to the channel on the usb.
Print instructions
W/O USB
Printed at 0.15 with PETG, 0.2mm will also work fine.
W/ USB
Print with Support for the usb tabs, use the 3MF for the support enforcers. Adjust the support pattern spacing to 0.2mm.
Print spec
- Formats
- 3mfgcodestepstl
- Model files
- 7
- Total size
- 3.3 MB
- Largest file
- 1.8 MB


