Skip to main content
F3D
#0010 J's Carabiner - Móc Khóa Kẹp Túi 1

4 images

Ý Tưởng Khác

#0010 J's Carabiner - Móc Khóa Kẹp Túi

By BuildX

Downloads
90
Likes
8
Views
896
Comments
14

Files 3 343.2 KB

  • Js_Carabiner_S_1765503897.stlSTL · 115.9 KB
  • Js_Carabiner_L_1765503906.stlSTL · 113.8 KB
  • Js_Carabiner_M_1765503914.stlSTL · 113.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

My daughter's purse strap clasp broke and I set out to look for a quick replacement.  What I found were ones that didn't lock or were more than just one piece, so I designed my own.  

There are 3 sizes here, so that you don't change the gap at the clasp when you try to scale.

My other Carabiner Designs:

Print using PETG/ABS/ASA, because PLA will likely not do well when flexed to open/close.  I printed mine in PETG to take advantage of flex characteristics and it works quite well.

I used 4 walls, 5 layers top and bottom, 20% infill, which is pretty stiff, but you can try your own settings.

NOTE: the gap in the locking snap area is designed to be 0.2mm which is good for a generally well-calibrated machine.  If your print is welded together too tightly, it could mean your printer needs further calibration.  If you believe your printer is already well-tuned, one quick way to improve gap control in this area is to increase your acceleration during extrusion so that not too much excess material end up in the snap area to weld it together (for my Prusa MKS+ acceleration of 1000mm/s^2 seems to work well.)

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Also please post a make as I would enjoy seeing you get good use out of it - it would make my day! :-D

Happy printing!

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
343.2 KB
Largest file
115.9 KB

14 comments

See all