Chân chống rung carbon Elegoo Centauri phiên bản cập nhật

NEW UPDATE:Behold an improved and raised version!

• I extended the bellow section to add one more to prevent bottoming out during Ludicrous mode prints
• Added more thickness to the adapter interface for more high frequency vibration damping
• Added a lip into feet and a recess inside the adapter so that no more glue is needed! just apply a lot of force and the TPU part will snap into place which makes it removable and swappable for a different color one or (future update: a different design of the TPU part)

IF YOU WANT MORE DAMPING; OR LESS STIFF FEET; PLEASE USE SOFTER TPU

Hi all CC users, this will revolutionize the wibbly-wobblies. The anti-vibration feet (real anti-vibration feet aka dampers) are to be printed in two pieces, print adapter piece preferably in PETG, PLA is also good, 3 walls and infill at will, orient them so that flat surface touches the bed and use tree supports. TPU dampening part aka spring shall be printed in 95-98A TPU (print softer at your own risk, haven't tried) 3 walls, orient in a way to avoid supports aka flat part at the bed. Glue two pieces with CA clue together and attach under your machine(s).

Leave a comment and a make to help me grow. Thanks :-).

UPDATE:Center holes were added to both models so that original feet screws can be accessed.