
Sovol SV06: Lồng ống PTFE cho bộ Reverse Bowden
Remix of Giá đỡ ống Bowden cho SV06 By onez_1759066
- Downloads
- 103
- Likes
- 13
- Views
- 604
- Remixes
- 0
- Comments
- 0
Files 1 495.4 KB
- SV06_Reverse_Bowden_Cage_1765601222.stlSTL · 495.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #154034
- Category
- Ý Tưởng Khác
- Published
Description
Inspired by and thus all credit for the original idea of such cage by Onez.
This remix has a longer support connection from the top gantry so the cage lines up in X-Y with the filament inlet port of the extruder.
This way, the reverse bowden tube can never get squeezed and the PTFE tube can always move freely in Z direction.
The cage hangs sufficiently high, so even with a Reverse Bowden tube Mount on the extruder and the extruder at highest Z position (f.e. during auto-align Z function), the tube connector can not hit the cage.
Printed upside down, in Sovol Blue PLA.
Original bolts for filament holder can be (re)used to connect the cage to the top gantry.
I combine this cage with clip-on PTFE tube twister guides, to guide the Reverse Bowden PTFE tube from my dry or storage box to the extruder mount.
I thought about making a slanted opening in the cage like I had on my previous tube guide, to facilitate the insertion/removal of the PTFE tube, at the expense of making the cage less rigid. User experience so far: with the quite long PTFE tube that runs to my dry or storage box next to the Sovol SV06, all required handling can be done just fine, even without such opening in the cage, leaving the tube through the cage all the time.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 495.4 KB
- Largest file
- 495.4 KB


