Skip to main content
F3D
Các bộ phận in được cho MK3.5(S) 1

1 image

Large file collection Ý Tưởng Khác

Các bộ phận in được cho MK3.5(S)

By F3D Team

Downloads
8,398
Likes
332
Views
21,352
Remixes
3

Files 24 63 MB

  • MK3.5_upgrade_BLK_PETG_1765451783.3mf3MF · 618.6 KB
  • MK3.5S_upgrade_BLK_PETG_1765451792.3mf3MF · 650 KB
  • MK3.5_-_MK3.5S_upgrade_BLK_PETG_1765451801.3mf3MF · 336.8 KB
  • psu-cover-R2_1765451808.stlSTL · 293.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 3

See all 3 remixes

Description

All printable parts for your Original Prusa MK3.5(S).

MK3.5(S) upgrade

Stage 1: Read the manual first!

Stage 2: Printing the required parts

  • The upgrade package includes a spool of PETG black (400 g). It is a sufficient amount of filament to print all the parts.
  • There are four G-codes available (2 for MK3.5 and 2 for MK3.5S), both include all parts for your MK3.5(S) upgrade. Select the first, if you plan to use your MK3.5(S) without Enclosure. Select the second, if you plan to use your MK3.5(S) with the Enclosure and the xLCD mounted outside.
  • Optional: If you decide to upgrade your older Silver PSU to the newer Black PSU, remember to print PSU-cover.stl from the 'PSU upgrade' folder in the 'Files' tab. Print settings are described below.

Stage 3: Assembling the MK3.5(S) upgrade

  • Follow the instructions, prepare parts, and then assemble your full MK3.5(S) upgrade.

Print instructions

Download the latest PrusaSlicer and use the following settings**:

  • Print settings: 0.20mm QUALITY
  • Filament: PETG (tested on Prusament)
  • 15% Grid infill

** Note that print settings are recommended, but you can experiment with your own.

Read more Show less

Print spec

Formats
3mfgcodestl
Model files
24
Total size
63 MB
Largest file
16.1 MB

0 comments

See all