Skip to main content
F3D
Hộp đựng thẻ Compact Flash chống va đập và bụi 1

1 image

Hộp đựng thẻ Compact Flash chống va đập và bụi

Remix of Hộp đựng thẻ MicroSD chắc chắn cho 30 thẻ và bộ chuyển đổi By Jascha3D

By Jascha3D

Views
66

Files 10 11.1 MB

  • Rugged_Compact_Flash_Box_Typ_1_4mm_0.2mm_PETG_MINI_2h54m_1765782222.gcodeGCODE · 3.8 MB
  • Rugged_Compact_Flash_Box_Typ_2_6mm_0.2mm_PETG_MINI_2h33m_1765782224.gcodeGCODE · 3.4 MB
  • Rugged_Compact_Flash_Box_Lid_0.2mm_PETG_MINI_1h17m_1765782225.gcodeGCODE · 1.9 MB
  • Rugged_Compact_Flash_Box_Latch_0.2mm_PETG_MINI_31m_1765782226.gcodeGCODE · 1.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#153332
Published

Description

Rugged Compact Flash Case 💾🛡

A tough and dust-resistant case designed to safely store and transport your Compact Flash cards. Perfect for organizing your gear on the go! 🚀

See also my other cases for different types of flash storage:

Capacity 📦

Holds 7× Compact Flash Type 1 (3.3 mm thick)

Holds 5× Compact Flash Type 2 (5.0 mm thick)

Print Settings 🖨

Material: PETG for case and latches, TPU for the seal (recommended) 🔧

Walls: 2

Top/Bottom Layers: 2

Infill: 20%

You can print the whole case in PLA if you don’t plan to carry it around much. If you don’t need the seal, feel free to skip printing it.

⚠ Note: The case is not waterproof but offers good protection against dust and sand. 🌵🌪

Parts needed 🛠

3× M3x30 screws (stainless steel preferred, galvanized also fine) 🔩

Foam for the lid to prevent cards from falling out 🧽

I used 30mm thick acoustic foam I had on hand. Foam similar to what Creality and Prusa use for packing their printers should also work well if cut to size. ✂

Feel free to like 👍 and post a make if you enjoy this design! 😄✨

Read more Show less

Print spec

Formats
3mfgcodezip
Model files
10
Total size
11.1 MB
Largest file
3.8 MB

0 comments