
Giá đỡ cuộn dây đa năng cho Voron Switchwire Gen 2
Remix of GIÁ ĐỠ CUỘN DÂY FILAMENT PHỔ DỤNG | GEN 2 By PurchenZuPoden
- Downloads
- 88
- Likes
- 28
- Views
- 1,110
- Remixes
- 0
- Comments
- 0
Files 14 28.2 MB
- SpoolAxle_1765549417.stlSTL · 4.4 MB
- Arm_Holder_M8_SquareNut_1765549418.stlSTL · 477.5 KB
- BigSpoolAdapter_1765549419.stlSTL · 2.5 MB
- Cap_Glue_1765549420.stlSTL · 3.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #152791
- Category
- Ý Tưởng Khác
- Published
Description
Wanted a spoolholder on 608 bearings I could mount on a switchwire spoolholder.
I remixed a design I liked a lot, and added the Switchire compatibility
This will be a drop-in replacement to the Spoolholder (the part with the PTFE Tube) of the Voron Switchwire.
It can also be used with my top mount Spool holder for Voron 2.4 and Voron Trident
Voron Top Mount Spoolholder with anti tangle and downwards PTFE guide by falcon14141 | Download free STL model | Printables.com
BOM:
- 608 bearings x2
- M8x120 mm screw
- M8 DIN-562 Squarenut
- Refer on thingiverse to the BOM of the locking spool nut.
Printing:
Depending on your choice, print your required parts.
Spool shaft endcap has 2 variations :
- Bicolor ERCF print
- Bicolor 2 part print glued together
Optional parts:
- Big spool adapter
- Non blocking insert (if you do not want to have to have the spool fixmounted)
Installation:
- Slide the Squarenut in the spoolmount
- Mount the bearings in the spool shaft, be sure to have the bearings fully inserted
- Slide the spacer onto the M8 screw, and slide it up to the screwhead
- Apply some threadlocker onto the M8 screw and mount the screw shaft to the Nut part
- Do not thighten too much, make sure the roller can spin freely
- Insert the cap at the end of the spool shaft. It shud be held snug fit into place
- Refer to the instructions on thingiverse for assembling the locking spool nut.
Print spec
- Formats
- stepstl
- Model files
- 14
- Total size
- 28.2 MB
- Largest file
- 8 MB


