
Hộp hút ẩm Slica cho Bambulab AMS
- Downloads
- 6,454
- Likes
- 742
- Views
- 30,805
- Remixes
- 5
- Comments
- 0
Files 2 4.6 MB
- SilicaBoxForAMS_v4_1767888453.3mf3MF · 905.6 KB
- SilicaBoxForAMS_v4_1767888454.stepSTEP · 3.8 MB
Make a variant with AI
Build another version of this model.
Remix versions 5
Hộp sấy Bambu Lab AMS (Dryer pod) kèm nắp snap-fitBySTprinting · 05/03/2026
Hộp đựng hạt hút ẩm siêu mỏng cho Bambulab AMSByOsuvense_1012378 · 04/22/2026
Silica - Hộp hút ẩm (Desiccant Dry Box) cho Bambulab AMS-USByMediaMan3D · 04/19/2026
Hộp sấy BambuLab AMS có khuyết cho bản sửa lỗi AMSBydietrich · 12/02/2025
Details
- Model ID
- #152522
- Category
- Ý Tưởng Khác
- Published
- License
- Creative Commons — Attribution
Description
Desiccant box for AMS.
The slim version support 44mm X 44mm X 13mm hygrometer.
-----------
Here is the explanation to address some comments regarding the hole orientation.
The reason I chose horizontal orientation, which results in many bridges when printing, is that in my experience, small and thin vertical parts are very difficult to print. They often experience heat creep or shaking during the printing process, and even if you print them very slowly, the print quality is not always guaranteed.
On the other hand, while printing bridges sounds challenging, it is actually much easier if the bridge length is taken into consideration in the design phase.
I hope that my explanation helps.
Print spec
- Formats
- 3mfstep
- Model files
- 2
- Total size
- 4.6 MB
- Largest file
- 3.8 MB


