Bộ sưu tập 11 nhân vật mô hình Mecca Chameleon in 3D vui nhộn
ByZED4EverLikes313Downloads5.2K
Ý Tưởng Khác
The HomeCube - Chiếu sáng vỏ hộp
Remix of The HomeCube - Vỏ máy in thông minh cho Prusa I3 Mk4/Mk3 và các máy in khác By sbuerger
- Downloads
- 91
- Likes
- 5
- Views
- 689
- Remixes
- 0
- Comments
- 0
Files 4 2.5 MB
- C3_LED_plate_nut_1764639847.stlSTL · 462.5 KB
- C1_LED_switch_plate_1764639850.stlSTL · 1,017.7 KB
- C4_LED_holder_1764639853.stlSTL · 65.3 KB
- C2_LED_jack_plate_1764639855.stlSTL · 997.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #152136
- Category
- Ý Tưởng Khác
- Published
Description
Note: This file set is an extension to the HomeCube enclosure project. To make use of this file set, you have to download the basic file set and building instructions PDF as well.
These are the printed parts needed for inside illumination of the HomeCube's case. If applied as instructed (see the building instructions linked above), the LED light sources can be unplugged and be taken off with the case as well as be unclipped and remain on the base plate when taking off the case (to serve as a working light for maintenance or repair of the printer).
LEDs may optionally be connected to the printer's PSU (so the light will automatically be turned on and off with the printer), however, in this case the LEDs' voltage has to match the printer's (12 or 24 Volt).
You may either use regular LED strips and carrier profiles like I did (see photos) or inexpensive aquarium light LED tubes like this.
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 2.5 MB
- Largest file
- 1,017.7 KB
0 comments
You may also like 2 models
See all-
-
T-Slot Nuts "ITEM" linh kiện thay thế
ByBasementLABLikes888Downloads1.5K
