Tấm Lưng Hộp Điều Khiển Atomstack A20 X20

Atomstack A20 (X20, S20) Pro Controller Back Plate 

This is a modification to the original model to continue using the Wi-Fi antenna. 

You can place the antenna in two orientations.
It isn't the most elegant, I was going for functional, design but it is a quick print and fits well. 

Print:
1x Wi-Fi Mount 
1x Mount Plate

Assembly:

1. Put some superglue in the recess you are going to use. 
2. Place the Wi-Fi mount into the recess.
3. Ensure the Wi-Fi cable fits into the groove.
4. Mount to the controller using the original 4 black screws with the mount on the inside. 

Mounting:
4x 3mmx16mm wood screws 

The tolerances are 0.1mm all round so you might need to file corners down depending on your printer tolerances. Use a spot of super glue to hold in place. 
Files are oriented in intended print orientation.

Enjoy, cheers