Giá Đỡ Mẫu Sợi Dây Filament

This filament sample holder is intended to be used with the samples created by Extrutim and can be found here.

Update 2024-02-12: I have created a v2 of the model with a small lip to hold the samples in place when opening the AMS.

I have made the sample holder to be able to stick to the AMS of Bambulab, so I can see which filaments are in there in which position.
On the filament samples I print the hotend and bed settings as well, so I know what to use as recommended settings.

My workflow is to always; create a filament sample for each new filament and keep it in the box that I printed by Extrutim. When switching filaments, I also replace the sample in the holder.

What you additionally need:

• Double sided tape

I used the following settings to print in 1.75 PETG with 0.4 nozzle:

layer height

0.2mm

walls

2

top shell layers

2

bottom shell layers

2

infill

15% grid

raft or brim

no

support

not if oriented right way up

Leave a like, make or remix as you like!