Giá đỡ điện thoại Trái tim có đường cắt và khảm V2 (Không cần hỗ trợ!)

Expand your horizons, and your phone stand collection. View (and print) the sturdy 4mm thick Sweetheart Phone Stand for the one you love. It includes a Voronoi style cutout on the back side and inlaid decorative hearts on the front. It is thick enough to print with PLA and not have issues.

Tip: Take it to the next level and emboss/deboss the model using your slicer to add custom text!

Update: I heard everyone's comments on a similar design and I have changed this design to now be significantly easy to print.

Printing tips (in other words, I had success with):

• I recommend printing on its side.
• 0.20mm layer height
• 6 wall loops recommended
• Supports are not required
• You shouldn't need a brim, but you know your printer better and may choose to use mouse ears at the corners.
• If you choose to print the legacy version, print on its back with 6 wall loops and organic supports, including supporting the base which goes into the air while printing and requires supports despite what your slicer says (most failures are due to this).
• I used Elegoo PLA on a Neptune 4 Plus