Skip to main content
F3D
Chén Giữ Rổ Lọc Moka Pot Chống Văng Cà Phê 1

5 images

Đồ Gia Dụng

Chén Giữ Rổ Lọc Moka Pot Chống Văng Cà Phê

By DylanDesign_361421

Downloads
211
Likes
37
Views
848

Files 2 4.1 MB

  • MokaPotWithoutFeet_1766666623.STLSTL · 2 MB
  • MokaPotWithSiliconeFeet_1766666624.stlSTL · 2.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Description: I was getting frustrated by always having to be super careful when filling the basket of my moka pot, so I designed this bowl to hold the basket while you fill it. It is designed so any overflow of coffee goes into the bowl and can easily be poured back into the coffee jar from the bowl. it is an extremely practical and useful print and I use it almost every day so I hope it can be of the same use to you 😁

🛠 Print Settings:

  • Time To Print: Approx 2.5 hours
  • Layer Height: 0.2mm 
  • Wall Thickness: 2 walls 
  • Infill: 15% Rectilinear
  • Bottom Layers: 3 layers
  • Top Layers: Aim for 3 or 4 top layers for a polished surface.
  • Supports: Not needed
  • Print Speed: Moderate speed for quality results; adjust to your printer's capabilities.
  • Nozzle: 0.6mm or 0.4mm
  • Filament: PLA works great, but feel free to explore with different materials and colors.

Two Versions:

  1. With 10mm diameter silicone bumper feet like these : https://shorturl.at/bgvMU
  2. Flat base without feet

Durability: I've been using this design, printed in PLA for over two years without any issues. Cleaning is a breeze – just wash with warm water and soap. 

Compatibility: The bowl is designed to accommodate a moka pot basket with a 10 - 11mm diameter stem, but you could easily scale the model for a bigger or smaller basket. If you want any design changes just let me know and I will see what I can do. 

If you make this please let me know how it works for you or what it looks like in other colours 😁

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
4.1 MB
Largest file
2.1 MB

0 comments

See all