Adapter CAMLOCK cho ống hút bụi dẻo

I found a nice flexible suction for a stand drill from @teslapunk HERE. However, I was missing the counterpart to connect to the CAMLOCK adapter from @PeterH HERE.

I therefore modeled an adapter between the flexible vacuum cleaner hose and the CAMLOCK connection end.

At the same time, I needed to attach the adapter next to the stand drill. Therefore, I also drew the adapter holder. To assemble it, you need 4 pcs M4 x 45mm screws and 4 pcs M4 nuts, for which there is room in the holder. I attached the holder itself to the table with 2 screws 3.5 x 35 mm.