KLP1-BonEr | Nắp che Voronoi cho Đầu đùn

Print it face down, preferably in ABS (PETG might also work well).

Has a weight of 13g compared to the 43g of the original metal part.

Paint the /!\-Sign like I did if you like :-)

You might need to drill the holes for the screws depending on your print quality - i needed to enlarge them using a 2.5mm drill.

Version 1 was a little too close to the bed - V.2 fixes this - and thats the first public release.
If adjustments are needed feel free to contact me :-)

Print settings:

• No Support
• 0.1-0.2 mm layer height (I used 0.15)
• 0.4mm nozzle or smaller preferred