Skip to main content
F3D
Hộp In-Nhanh 1

7 images

Large file collection DIY

Hộp In-Nhanh

By gillis

Downloads
948
Likes
184
Views
4,235
Remixes
1

Files 28 51.5 MB

  • Box_0.2mm_PLA_MK3S_8h11m_1765588000.gcodeGCODE · 6.7 MB
  • BoxStackingFrame_0.2mm_PLA_MK3S_46m_1765588035.gcodeGCODE · 770.7 KB
  • Box_HalfX_0.2mm_PLA_MK3S_4h37m_1765588042.gcodeGCODE · 4.7 MB
  • Box_0.2mm_PETG_MK3S_8h10m_1765588068.gcodeGCODE · 6.8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Details

Model ID
#149422
Category
DIY
Published

Description

Printed with default Prusa Slicer settings and with 15% infill.

For measure, see images.

However, when you print the stacking frame on the Prusa Mini you must set the skirt to 0 (zero) otherwise it wont fit on the hotbed.

The stacking frame can just be layed on top or be glued with some drops.

Please be careful when working the hinges for the first time. A bit force is necessary.

I have also included some boxes with insets. See under the STL_INSETS section. 

Please let me know if you need any special inset and I will try to make one (within reason)

And also if you need a special size I will try to make it (also within reason :-)

One more thing. I've printed using PETG for a while now so printing with PLA is somewhat untested!

One thing!

I printed a PETG box the other day and had trouble getting the hinges to come loose. I had to take my swiss army knife and pry a little. It's between the lid and the box. Take it easy and be patient.

Feel free

https://www.paypal.com/paypalme/gillislindstrom

Read more Show less

Print spec

Formats
3mfgcodestl
Model files
28
Total size
51.5 MB
Largest file
6.8 MB

0 comments

See all