Đầu Súng Massage - Bi Lăn

Model Description:

The attachment is compatible with popular massage guns. When the attachment is not applied to the body, it makes a bit of noise, but it glides smoothly over the skin compared to a regular round attachment.

File Description:

I have sent two STL files with two ball-to-pocket distances, 0.3mm and 0.4mm, as well as a FreeCAD model file.

Print Description:

I personally printed the 0.4mm version in PLA with supports, 25% infill. Print time was 1 hour and 12 minutes, material consumption was 33g.

Reflections After Printing:

It printed nicely as a whole; I removed the rubber band from another unused attachment. The ball from the bottom could be smoothed a bit with sandpaper (at least in my case with 0.4mm). The 0.4mm clearance is noticeable by the fluttering sound when the attachment is in the air.