
Pát đỡ trục Z cho máy in Prusa Mini
Remix of Gia Cố Trục Z Cho Prusa Mini By BrolinWorkshop_74933
- Downloads
- 2,535
- Likes
- 616
- Views
- 14,376
- Remixes
- 2
- Comments
- 0
Files 2 195.2 KB
- z-brace_1765455036.stlSTL · 141.5 KB
- z-brace_1765455037.3mf3MF · 53.7 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Nẹp trục Z trơn cho Prusa MiniByderpedda · 12/19/2025
Giá đỡ trục Z Prusa Mini cải thiện độ cứng XZByDaniel_552627 · 07/15/2025
Details
- Model ID
- #147978
- Category
- Máy In 3D
- Published
Description
Support for z-axis of Prusa MINI printer. Inspired by https://www.prusaprinters.org/prints/51415-prusa-mini-z-axis-brace/.
You will need:
- 6pcs M5x12 ISO 7380 bolt (https://www.ebay.com/itm/232247392111)
- 6pcs M5 t-nuts
Print instuctions:
Print with side that is attached to z-axis facing down. Use at least 20 % infill. Supports are needed under y-carriage side mount (see picture below).

Installation:
First, put bolts through holes and hand-tighten t-nuts and align them as on photo below. Leave out holes that are on top of Y-axis.

Now place z-axis support on top of Y-axis and slide t-nuts in mounting profile.

Continue with sliding it towards the Z-axis.

Loosen all bolts a bit so that they can lock in the profile and tighten them firmly.
Last step is to place t-nuts inside top of Y-axis and thighten last two screws.

And you are done.

Print spec
- Formats
- 3mfstl
- Model files
- 2
- Total size
- 195.2 KB
- Largest file
- 141.5 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-

