Đế cắm IEC C14 thay thế ổ cắm Schuko

Needed an IEC C14 outlet which should replace an in-wall mains Schuko socket. -insert was printed with tree support and -plate without. From an old Schuko socket I removed the metal frame where the printed -insert is mounted with two 4*12mm screws. The cover (plate) is attached with two 2,5*10mm flathead screws. The cover was made to fit my existing frame. One will have to chop off the sides in CAD and add what is needed for a different style.

The IEC C14 socket is held in place by two M3*12mm flathead screws and nuts.