Hộp Gridfinity đựng pin CR2032

Higher version remix of @DieserJonas' CR2032 Gridfinity bin. Wanted it to be the same height as the “no lip” models of @Dalkain's Gridfinity Battery Trays.

Orignal Description:

A small 1x1 Gridfinity bin that holds 8x CR2032 batteries. Created to be as simple as possible, without a stacking lip and without magnet and screw holes.

Print Instructions

• Any basic PLA should work
• 0.2 mm layer height
• 0.4 mm nozzle
• PrusaSlicer speed profile