Máy tạo đá quý 3D

Generate cartoon-styled gemstones with our latest, free, 3D printable design.

This simple customizable design allows you to choose the number of sides, dimensions and proportions of your gemstones.

This design is*completely free* and shared under a permissive license. Your support is hugely appreciated.

Did you know?

Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects:

https://codeandmake.com/premium

OpenSCAD Customizer Options

We recommend you use OpenSCAD to customize this design.

This design has the following Customizer options:

General

• Diameter - Diameter at widest point
• Sides - Number of sides

Bottom

• Bottom_Height - Uncut height of bottom section
• Bottom_Cutoff_Percent - Percentage to cut from bottom section

Middle

• Middle_Height - Height of middle section

Top

• Top_Height - Uncut height of top section
• Top_Cutoff_Percent - Percentage to cut from top section

Printing

• Orientation - Rotate onto face for easier printing

Preview

• Show_Uncut_Ends - Show uncut ends in preview mode

Design Considerations

In many cases, it should be possible to print designs without supports. For the best results, consider the angle of overhangs and use the Orientation option.

Material

This design is perfect for printing in most filaments, but we recommend translucent filaments/resins in particular for this design.

Versions

• 1.1 (29 Jan 2022)
  • Added Customizer tabs
  • Increased max Sides to 12
  • Added option for middle section (Middle_Height)
  • Added Show_Uncut_Ends preview option
  • Updated Orientation options:
    • Renamed Side to Bottom Side
    • Added new Side option
    • Added Top Side option
• 1.0 (28 Jan 2022) - Initial version

Printing

Recommended slicer settings:

• Resolution: 0.1mm - 0.2mm
• Infill: ~10 - 20% recommended.
• Supports: Should not be required for most designs, but designs with significant overhangs will require supports.
• Rafts: Not required, unless you experience adhesion issues.

License

The "Gem Generator" models (.stl) are licensed under the CC BY license by Code and Make.

The "Gem Generator" code (.scad) is licensed under The MIT License by Code and Make.

We are proud to offer content to you absolutely free.

We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:

https://codeandmake.com/support

We thank you so much for your support!

Category: Jewelry