Giá đỡ dao Ikea UPPDATERA

Designed to hold ~12 knives with <150x20mm blade. Requires some space above the UPPDATERA - my drawer has about 65mm, works perfectly.

Print the holder two times and the support once, flattest face on the bed (=support upside down). Holder has adhesion tabs to prevent warping. 4x M3 contersunk 12-16mm screws are needed to assemble, I used metric, wood-screw will probably work as well.

Printed on MK3S+, PETG, .30 DRAFT Prusa Slicer setting, 2 perimeters (default), no supports.

Do not forget to paint seam at the back of the holder so it does not end up in the front :)