Bộ lưu trữ khuôn góc CMT TMP-R12

Update 31.08.2023: The cover is now multilevel and can be printed in three different colors.
You can print with a layer height of 0.1 or 0.2 mm (You can control in your slicer.)
I printed with a layer height of 0.2 mm.
- 9 layers (1.8 mm) - print in orange;
- change of filament;
 - 4 layers (0.8 mm) - print in white;
- change of filament;
- Finish printing (0.9 mm) in black.

Printer brand: Flying Bear
Printer: Ghost6
Rafts: No
Supports: Yes 
Resolution: 0.2
Infill: 30%
Filament brand: Esun
Filament color: orange, white, black
Filament material: PLA+ (orange, black), ePLA-matte (white)
Slicer: Ultimaker Cura 5.4.0
Printing temperature: 220 Celsium
Build plate: 60 Celsium
Print speed: 60 mm/s
Fan speed 100%

If the cover is tight in the grooves of the box, use thick silicone grease.

There are also holes for magnets 3*2 mm.