Một Đế Giữ Đồ Khác Cho Bambu Labs

This is a holder for these items:

• Biqu nozzle cleaning kit
• Bambu Labs glue stick (probably others, also; it's roughly 26mm diameter)
• A plastic razor scraper handle and a few replacement blades, similar to this one: https://www.amazon.com/dp/B09Y5WQFP4/
• The included allen wrenches from the X1C
• A deburring tool (I think it's the same as this one, and just a different color, but there's no branding on it that I can find: https://www.microcenter.com/product/616466/general-tools-deburring-tool-with-swivel-head)
• several nozzle cleaning needles (either from the Biqu kit, or elsewhere)

I had to try a few sizes for the needle holes before they were a good compromise. I think the same size will be suitable on other prints in PLA, but fine details are the most prone to issues.

I recently decided to upload all of my designs, regardless of how likely I think it is that someone else will be looking for the same thing. I was and am still a novice at openSCAD, so the quality/customization of some of these designs is poor. If you have any specific questions, I will try to help.