BeamCase - Pát gắn nút bấm 16mm đơn giản

This is a bracket to mount a 16mm button to your BeamCase frame (or other 15x15mm aluminium profiles)

These brackets are designed to work together with the modular BeamCase ITX case which can be found here.

Required Hardware

Screws: 
M3x8mm countersunk screws (2pcs per bracket)
Nuts: 
standard M3 nuts (2pcs per bracket)

Button:
16mm vandall button (all sorts can be found on Amazon)

Print Instructions:

Ideally print this model in a stronger and more temeperature resistant filament like PETg or ABS. Ideally compensate for shrinkage, but it is not neccessary as these brackets do not have to be precise. 
This print like all BeamCase parts does not require any supports. 

I adjust for ABS shrinkage by scaling the model to 100.5% (Bambu Lab P1S and Sunlu ABS) , but it depends on the filament and printer and print speed.