[REMIX] Hũ có Nắp Nam Châm

Items you need:

• 3 x “10mm (diameter) x 3mm (thick)” magnets (neodymium magnets are recommended for better holding power).

Assembly
Magnets are held in place through friction-fit. If the fit is loose, consider using some adhesive.

Suggested print settings:

• Layer height 0.2mm.
• Infill 15%.
• No supports are needed.

NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.