Đế cho Mô hình Stationfall

MINIS NOT INCLUDED! (They are part of the Stationfall boardgame, I wish I could print at that resolution!)

This is a set of bases for the Stationfall miniatures, which a) allow distinguishing human from robot via the base color, and b) provide a space to attach stickers with the character icons for easier identification. Stickers are available (or will be soon) on BGG.

The bases are designed (other than the cyborg, see below) so that the minis can slide in but will stay in place. The human ones are a little looser; I found my mini bases were slightly oval so you could slide in, rotate, and then they would stick. The robot bases are a little tighter but I had no issue putting my minis in, and nothing moved around during play.

(One miniature, the Security robot, does not need a base due to its design; I recommend just placing a sticker on top of the mini.)

Print 21 of the green human bases, 5 of the robot bases, and 1 each of the two cyborg pieces. (The cyborg is human and robot; the robot base has an extra overlap so you can glue the pieces together. I recommend placing the mini in the base when gluing, but be careful that it doesn't become permanently glued in!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2mm

Infill:

20%

Filament: Hatchbox PLA Green / Grey

Notes:

No supports, tiny amount of filament.

Post-Printing =============

Apply labels!

Labels are not part of the 3D Print. :) Download from BGG, print them out, cut them out, stick them on. I used sticker paper but you could use normal paper and glue.

Category: Toy & Game Accessories