Giá Đỡ/Khay Sơn Vallejo (25 mm)

The following sizes are currently available for download:

Width

Height

3

2, 3

5

2, 4

7

4, 5, 6

9

5, 6

I recommend to fill the bottom with plaster, which makes it much more stable (that's why there is a hole 😉. And some small rubber feet prevents it from slipping around.

Also works great when laid down flat, f. ex. to store it in a drawer.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Prevent print failure

My first 9x6 failed after 19 hours 😩 because the nozzle knocked over some of the vertical poles:

To prevent this, I slowed down the three critical layers (216-218) to 20% of the normal speed (The 3mf files include this adjustment already):

When printing a large stand (9x6),  you should consider to add a manual brim on the sides and on the top, as there is only space left for a 1.2 mm brim on a standard Prusa MK print bed.

To add them, use the “Add part” function (Example file below)

Maybe a bit too much brim, but worked: