Khung Gắn Màn Hình Hyperpixel 4" Lẻ Bên Ngoài Vỏ Lack Máy Prusa MK3S

Remix of Khung Che Màn Hình LCD cho Màn Hình Cảm Ứng HyperPixel 4 inch By Ben

By Cory M M

Downloads: 350
Likes: 77
Views: 4,965
Remixes: 1
Comments: 0

Download all (.zip)· 5 files · 5.5 MB· 5.5 MB

Files 5 5.5 MB

hyperpixel4lcd-coverbody_02mm_petg_mk3s_4h59m_1767510702.gcodeGCODE · 5.1 MB
mount-base_1_1767510699.stlSTL · 87.6 KB
hyperpixel4lcd-cover_v1_1767510700.stlSTL · 256.2 KB
lcd-support-right_1_1767510700.stlSTL · 23.7 KB
support-left_1_1767510701.stlSTL · 36 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

MK4 Hyperpixel 4 - Mount Octoprint/OctodashByMekCreate · 07/07/2025

See all 1 remix

Details

Model ID: #141571
Category: Máy In 3D
Published: 07/07/2025
License: Creative Commons — Attribution
Tags: thingiverse

Description

Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen.

Line the bottom of the mount base flush to the bottom of the lack table to insure clearance of the doors.

The print pictured above is in Red PETG by SPOOL3D, I used 0.10mm detail setting in prusa slicer but the gcode uploaded is for 0.20. Can used PLA if you wanted to this is just what I did.

Cheers!

Print instructions

Category: 3D Printer Accessories Summary

Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen.

Line the bottom of the mount base flush to the bottom of the lack table to insure clearance of the doors.

The print pictured above is in Red PETG by SPOOL3D, I used 0.10mm detail setting in prusa slicer but the gcode uploaded is for 0.20. Can used PLA if you wanted to this is just what I did.

Cheers!