
Đồ Gia Dụng
Nắp bản lề cho ấm nước Elta bằng kính
- Downloads
- 0
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 2 375.6 KB
- Kettle-Lid_Sparepart_1766682422.stlSTL · 284.8 KB
- Kettle-Lid_Sparepart_1766682423.3mf3MF · 90.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #14058
- Category
- Đồ Gia Dụng
- Published
Description
Printing
Due to the exposure to hot temperatures in the kettle, I used ASA as a material.
I played with different orientations and found that the orientation in the .3mf file produces the most mechanical strength.
After I had first layer adhesion issues (even with a brim), I put everything onto a raft which solved it.
Assembly
- Remove and unscrew all the old/broken parts, the lid should be seperate now
- Screw the new part onto the kettle
- Remove the top cover of the lid by using e.g. a screwdriver as a lever
- Take the metal bar out of the hinge
- Position the lid onto the printed part, take care of the metal spring
- Lead the metal bar through the holes in the lid, the new printed part and the metal spring
- after this step, the hinge should work already
- clip the cover of the lid back on, be careful about the button in the middle
Notes
I will provide more pictures in the next days
Print spec
- Formats
- 3mfstl
- Model files
- 2
- Total size
- 375.6 KB
- Largest file
- 284.8 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -

-

-

-

-

-

-

-


