
Hộp đựng đầu phun (Nozzle Box)
Remix of Hộp Đựng Đầu Phun Máy In 3D (Nozzle Box) By Maciey
- Downloads
- 187
- Likes
- 33
- Views
- 1,266
- Remixes
- 1
- Comments
- 0
Files 3 10.1 MB
- nozzle-box-text_0.25n_0.15mm_PLA_MK3S_3m_1766153990.gcodeGCODE · 148.9 KB
- nozzle-box_0.25n_0.15mm_PLA_MK3S_4h48m_1766153991.gcodeGCODE · 7.2 MB
- nozzle-box-new_1766153989.stlSTL · 2.8 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #140146
- Category
- Máy In 3D
- Published
Description
Please read the description of how to print this box
Print instructions
The file nozzle-box-new.stl contains several parts.
-
If you want the box to be smooth on the top (without labels) you can just open it in your slicer and print it.
-
If you want the labels on the top to be engraved, you need to split the file into parts (in your slicer) and delete the parts 3 to 15.
-
If you want the labels on the top to be printed in a different color, you need to split the file into parts (in your slicer) and generate two gcode files out of it. One with the parts 1, 2 and 16 and one with the parts 3 to 15. Print the file with the part 3 to 15 first (WITHOUT SKIRT!), change the filament and then print the other one.
The labels are low enough that there is no problem with mesh bed leveling.
I recommend printing with a 0.25 mm nozzle, so the labels on the inside of the box are printed properly.
The pre-sliced files are for printing with a 0.25 mm nozzle, with the labels on the top in a different color and with a color change for the labels on the inside of the box.
Print spec
- Formats
- gcodestl
- Model files
- 3
- Total size
- 10.1 MB
- Largest file
- 7.2 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-
New -

-

-

-
New -

-

-



