Ngăn Kéo Treo Dưới Bàn

Info

I designed this drawer so that it perfectly fits on my Prusa MK3S+. If it doesn't fit on your printer you can just scale it down (or up).

It has a smooth sliding rail to give you perfect access to all your stuff currently lying around on your desk. Like pens, cables, sd cards, notebooks and more.

To mount the drawer under your desk you'll simply need 4 ⌀3mm wood screws. The advatage is that you don't need to adjust the spacing of the rails (like in other desings) because they're already perfectly adjusted.

Printing

To print the drawer you'll only need a bit of support material under the handle. Nothing more.

PLA works fine. If you want you could also use PETG or something else.

Partslist

• 4 × ⌀3mm × 20mm wood screws (length isn't that critical)
• the Drawer
• and the Rail

----------------------------------Update List------------------------------------

                                                                 Latest at the top

Update 4. September 2023

• Added “Drawer V1.1 [70mm, without Hexagons]”, that just has a flat bottom. 
• Added “Drawer V1.1 [70mm, Gridfinity® 3x4]”. With this Drawer your can use other Functional Organizer from the OpenSource Project “Gridfinity”, which was invented by Zach Freedman!!!

Update 31. August 2023

• Added new simplified V1 Drawers, without the Hexagons and Dividers!
• Updated all Drawers to have Cutouts for the Screwheads.

Update 3. June 2023

• New 70mm tall Drawer, that has more storage capacity and the same rail geometry.
• Added 2 small Cutouts in the back of the Drawer, to avoid clearance issues with screwheads.
• New 2.5" SSD Drive Holder, that fits into the Hexagon pattern of the 70mm tall Drawer. It has 6 SSD slots and doesn't fit in the standard Drawer!
• New SD-Card Holder with 6 slots. It can be put in any Drawer.