
Móc Khóa & Logo Cradle of Filth
- Downloads
- 25
- Likes
- 3
- Views
- 198
- Remixes
- 1
- Comments
- 0
Files 4 29.6 MB
- cradleoffilth-v2-keychain_1767502439.stlSTL · 4.2 MB
- cradleoffilth-v1-keychain_1767502440.stlSTL · 10.6 MB
- cradleoffilth-v2-logo_1767502441.stlSTL · 4.3 MB
- cradleoffilth-v1-logo_1767502443.stlSTL · 10.5 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #139046
- Category
- Mỹ Thuật
- Published
- License
- Creative Commons — Attribution
Description
Cradle of Filth Keychain & Logo
Contains 2 versions:
v1
v2
Also check out stronger remix of this model: https://www.printables.com/model/748967
Also contains model without hole for keyring in both v1 and v2. You can add your own directly inside slicer to fit your specific needs, or print it as it is, just like a logo.
To make it multicolor, you don't need AMS. Just add a pause after the layer in the middle, manually swap filament and continue printing.
For example my print had 5 layers, so a added pause at the beginning of 4th layer (after 3rd). When it stopped, I hit Unload filament on the printer, then loaded different color, then I continued the print.
I printed it with following settings:
Nozzle
0.4mm, highly recommended to use smaller nozzle for more detail
Layer Height
Highest possible
Wall Loops
4
Infill
Rectilinear, 100%
Supports
None
Brim
None
Printing took around 15 minutes on Bambu Lab A1 Mini (Standard speed)
Note: Keyring hole diameter is 2.65mm, keyring I used is 2.5mm thick
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 29.6 MB
- Largest file
- 10.6 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-
New -

-
New -

-
New -



