Kẹp "Multiboard" gắn phía sau màn hình Lenovo

== Aha moment ==
There's so much unused space behind my pc screen (Lenovo ThinkVision T24i-10) that I though it would be the best place to have a Multiboard and hang some of the things laying on my desk.

== Problem ==
Drilling the screen won't be a good idea, and gluing didn't sound as strong enough. I needed some clamps, claws, clips, whatever

As you probably understood by now, this model is related with the Multiboard, a masterpiece designed by Jonathan from Keep Making, so go check all his stuff because it's worth it

• Youtube channel: https://www.youtube.com/@Keep-Making 
• Multiboard website: https://www.multiboard.io/ 
• Models (on thangs): https://thangs.com/designer/Keep%20Making

== This model/remix ==
This mode has 2 adaptations of the 8 mm Offset, Trio Command Strip Mount - DS Part A, one for the top clamp and another for the bottom clamp, as both edges of the screen have different sizes and formats.

== Additional parts ==
Aside from these 2 models I used the parts bellow to compose the Multiboard:

• 1x  6x4 Multiboard Side Tile
• 1x  6x4 Multiboard Corner Tile
• 2x Trio Snap Connector - DS Part B  (to lock in place and reinforce the clamps)
• 1x  8 mm, Cross Quad Offset Snap - DS Part A (to join both tiles)
• 1x  Cross Quad Snap Connector - DS Part B  (to lock the snaps)