Ốp Cột Lái MG Midget 1968-1975

This is a recreation of the steering column cowl for a 1968-1975 MG Midget, which seem to be pretty hard to find these days. I based this model off of the cowl that I copied from my 1978. I referenced pictures of the earlier cowls and made the needed changes.

These should also fit ‘76-’80 Midgets, but the factory cowls for those years have auxiliary switch locations under each of the turn signal & wiper stalks.

You will need (2) #10-32 heat set inserts, which get inserted into the right/ignition half of the cowl. To mount the halves to the steering column, you will need (2) #10-32 x 1" & (2) #10-24 x 1/2" long panhead machine screws.

The (4) locating pins get inserted into their respective locations, as seen in the pictures. I used popsicle stick pieces for prototyping.