Cattiva Palworld Đã Sơn Màu

I uploaded painted versions of Cattiva from Palworlds. These are “untested” models. I tested that the model does print well but I did not do it in multi-color due to me not having decent colors. 

Tested for bambuStudio and OrcaSlicer. 

2 versions are Uploaded. One for a single  AMS with a color swap mid-print and one for the ballers with 2 AMS units.

If you want to scale the Single AMS version you have to change the pause height as well. 
Support is necessary. 

How To Print On Single AMS:

1. Load filament profiles
2. Confirm pause is in the correct location
3. Check flushing volumes:
   You want to make sure that before you print the filament with the highest flushing volume is selected. This way, when you do change from color A to Color B, the flushing volumes are correct. 
4. Start Printing.
5. During the pause, change out the filament for the new color. 
6. Continue printing.
7. During the pause, change out the filament for the new color. 
8. Finish printing!

If you do print this model, and would like to have your picture as the cover please let me know.