Skip to main content
F3D
Hộp đựng bài UNO Đa Sắc 1

5 images

Đồ Chơi Khác

Hộp đựng bài UNO Đa Sắc

Remix of Hộp Công Cụ Miễn Phí Dành Cho Người Dùng Việt Nam By Whity

By luc

Downloads
1,120
Likes
229
Views
4,682
Remixes
1

Files 4 1 MB

  • lid_multicolor_1766165023.3mf3MF · 890.2 KB
  • bottom_1766165024.3mf3MF · 107.9 KB
  • inner_card_holder_1766165025.3mf3MF · 30.3 KB
  • latch_1766165025.3mf3MF · 42.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

This UNO Card Box with multicolored logo is based on the UNO Card Box by Markus_p.

The 3MF file of the lid also contains the parts needed for the logo. PrusaSlicer opens this just fine, I don't know about other slicers. Use a pause/filament change/M600 command for color swapping for the first layer. Make sure your first layer height is 0.2mm, otherwise you must also swap colors on the second layer.

Check the comments for a detailed print guide made by lost_371113. (Using PrusaSlicer and a single extruder).

The inner card holder could be glued in place. Note that the beveled side should be at the front. 

The box will not close properly if the card holder is glued the other way around. Test before gluing.

For the hinges you will need 6x additional M3x30mm screws.

Filament used:

  • SUNLU PLA Marble (I think it has small pieces of rock in it, so not the best for your nozzle.. But it looks great!)
  • RepRapFilament PLA Yellow
  • RepRapFilament PLA Red
  • Some random black PLA

Read more Show less

Print spec

Formats
3mf
Model files
4
Total size
1 MB
Largest file
890.2 KB

0 comments

See all