Cốc Raktajino Star Trek - DS9

This is my take on the Raktajino Mug from Deep Space 9.  It is basically an aluminum can holder.  The can in the photo is 12oz.  There is a hole in the bottom to make it easier to remove the can.  My print was done using a .6mm nozzle and .4mm layer heights.  I used basic settings with organic supports.  I did use infill modifiers for the handle and where the handle transitions into the body.  I used a 50% infill in these areas and 15% everywhere else.  Infill type was cubic.  It took about 6hr 45min to print.  Removal of the supports was very easy.  It is very easy to print.

The mini mug was a test print (50% Scale).  I will be keeping it to use as a Christmas Tree ornament.

I have attached a second model with it pre-scaled at 56% that nicely holds 4 AA Batteries. This model has a solid bottom.