Chân đế cho PC mini Esprimo®

The "Stand for Esprimo® mini PC" is a stand for the Fujitsu® Esprimo® mini PC, mainly the Q-series. If you own one of these mini computers and do not have the optional (original) stand, you can print it now. This allows the mini computer to stand upright and cool better.

Please note: there are two versions of the Esprimo®, one with 54mm and the other with 58mm width. It is a result of thin or thick plates used for the computer (see image). Please measure your Esprimo® before downloading to get the right bracket's width.

The main concept of the stand is: two brackets (front and back) and a strut with holds the brackets with two tenons. The back bracket has a cut-out for the computer's headphone jack.

There are two versions of the brackets (54mm and 58mm) pendently what width your Esprimo® has. The strut is in both cases the same.

I designed the 3D models of the stand in Shapr3D, spliced it with PrusaSlicer and let it print with PLA on my Prusa i3 Mk3. Supports are not necessary. It is recommended to place the brackets on their side in your slicer, before they will be printed. You can set to "0.30 mm DRAFT", the quality will be all fine.