Giá đỡ máy bộ đàm Yaesu FTM-350

Mounting bracket for FTM-350 amateur TRX - i.e. for under-shelf mounting.
TRX unit is secured with 4 screws (knobs are prepared for M4x16mm ones). Bracket has place for 5 mounting screws (countersunk head, up to 4mm, but can be drilled for larger diameter).

Please note, that unit has mounting holes placed closer to the back of the unit, so speaker comes to the open side of the bracket.

Printed with ordinary PLA (100% infill using 5 perimeters with nozzle diameter 0.6mm). Knobs printed with large diameter nozzle may need some force to install screws, technique similar to nut pulling may be beneficial (remember to use a washer).