Pas kẹp cho thanh Din ray

Mounting bracket for a standard 35 mm Din rail. 

The design consists of a mounting plate and a spring clip clamping the plate to the rail. All parts are 3D printed on an FDM without support if oriented correctly. 

DESIGN

The design is as simple as possible to allow easy modification, created Onshape.

If you want some variations, just let me know!

PRINTING

Printed in Prusa recycled PETG on a Prusa mini with 100% infill .20 Quality setting.

ASSEMBLY

1. Insert the clamp in the mounting bracket (only one way possible)
2. The clamp hold in a detent when not engaged, but can slip out if pulled hard. 
3. Hang the bracket with the lip onto the rail and push the clamp in. 

Happy printing

Fabian