Skip to main content
F3D
Bộ Dẫn Filament Ngang Cho AnkerMake M5C (Remix) 1

3 images

Máy In 3D

Bộ Dẫn Filament Ngang Cho AnkerMake M5C (Remix)

Remix of Bộ Dẫn Dây Tóc Thay Thế Cho AnkerMake M5C By just_trey_187373

By Matt_H_1489545

Downloads
208
Likes
30
Views
1,063

Files 1 409 KB

  • M5C-Filament-Gantry-Side-Guide_1767245281.stlSTL · 409 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#129845
Category
Máy In 3D
Published

Description

Having my M5C in an enclosure, where the enclosure sits on its side, I didn't have enough room to run the OEM spool-holder arm in the original upright/vertical position, as it was too high.  So I installed the arm horizontally which works well, however, due to the Bowden-tube guide topper attachment, only working in the vertical position, I can't use it as it would just fall off and the hole would be incorrectly oriented in the vertical position.  

Seeing @just_trey's Alternate AnkerMake M5C Filament Guide version, which I really like, I remixed it slightly to allow the filament to insert from the right side of the printer, as it did with the original guide.  I chopped it up and reoriented the arm to allow the filament to come in horizontally, keeping my height within clearance of the enclosure ceiling.  

Common Parameters

Total Print Time

Number of Print Files

Layer Height

Nozzle Diameter

Material

1 hr 1 m

1x print file

0.2 mm

0.40 mm

PLA+

Weight / Printer Make & Model / Temps

Total Weight

Printer

Bed Temp

First Layer Temp

Other Layers Temp

17g

Ankermake M5C

60° C

215° C

215° C

Infill / Skirt / Brim / Support

Infill Density

Infill Pattern

Skirt

Brim Width

Support Material

15%

Grid

2 Loops

3 mm

Yes (Organic; Tree)

Speeds (mm/s or %)

Perimeter Speed

Infill Speed

Small Perimeters

External Perimeters

Non-print Travel

250

250

40%

50%

300

Remix of: @just_trey's Alternate AnkerMake M5C Filament Guide

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
409 KB
Largest file
409 KB

0 comments

See all