Tấm Chắn Nhiệt Máy Sấy Filament EIBOS CYCLOPES

! Warning: do not print with PLA, use ASA or ABS instead!

On heat sensitive filaments such as PLA, the dryer can be a little hot on the bottom. In order to distribute the heat throughout the whole chamber, this heat shield redirects the airflow away from the filament spools.

This should be printed on the side, supports are designed in and can be easily removed by hand. I used a brim to get it to stick to my surface.

Please use at least ABS or better ASA for sufficient heat resistance!